LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - ZF 4HP 16 - Service, Overhaul, Removal & Installation, Troubleshooting & Diagnosis >> Transmission Fluid Draining >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Use the DT 46475  (1) to install the transaxle fluid drain plug. See Special Tools .

    Tighten:  Tighten the drain plug to 45 N.m (33 lb ft)  .

  2. Fig 1: Filling Transaxle With Fluid
    GM1255913Courtesy of GENERAL MOTORS CORP.
  3. Add the transaxle fluid. Refer to Transmission Fluid Level Inspection .