LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - ZF 4HP 16 - Service, Overhaul, Removal & Installation, Troubleshooting & Diagnosis >> Front Axle Shaft Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of DT 46470
    GM1255956Courtesy of GENERAL MOTORS CORP.
  1. Use DT 46470  (1) to install the transaxle drive seal. See Special Tools .
  2. Install the drive axles. Refer to Wheel Drive Shaft Replacement (Diesel - Automatic and Manual) or Wheel Drive Shaft Replacement (Gasoline - Automatic Transaxle) or Wheel Drive Shaft Replacement (Gasoline - Manual Transaxle) .
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals