Determining Adjusting Disc F

Calculate the test dimension PF (PF = BF - MF).
BF = installation space

MF = disc set thickness assume 14.50 mm (0.57 in)

EXAMPLE

BF = 18.70 mm (0.735 in)

MF = 14.50 mm (0.571 in)

PF = 4.2 mm (0.164 in)
Find the disc set thickness. Refer to Transmission General Specifications .
PF is 4.20 mm (0.164 in), so the disc set thickness is 3.0 mm (0.12 in).
Replace clutch B setting disc 3.0 mm (0.12 in).