Installation Procedure

Fig 1: View Of Rear Outlet Pipe, Bolt And Clip

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the fluid cooler rear outlet pipe fitting nut.
Tighten: Tighten the fluid cooler rear outlet pipe fitting nut to 35 N.m (26 lb ft) .
Install the fluid cooler rear outlet pipe clip bolt.
Tighten: Tighten the fluid cooler rear outlet pipe clip bolt to 9 N.m (80 lb in) .

Fig 2: View Of Front Outlet Pipe And Union Bolt

Courtesy of GENERAL MOTORS CORP.

Install the front outlet pipe union bolt into the radiator.
Tighten: Tighten the front outlet pipe union bolt to 35 N.m (26 lb ft) .
Install the front outlet pipe clip bolt into the radiator.
Tighten: Tighten the front outlet pipe clip bolt to 9 N.m (80 lb in) .
Fill the transaxle with the fluid.