LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - AISIN 81-40LE - Service, Overhaul, Removal & Installation & Diagnosis >> One Way Clutch Assemble

One Way Clutch Assemble

    Fig 1: View Of One-Way Clutch And 2nd Brake Hub
    GM1246034Courtesy of GENERAL MOTORS CORP.
  1. Install the retainer to the 2nd brake hub.
  2. Install the one-way clutch.
  3. Fig 2: Removing Snap Ring From 2nd Brake Hub Using A Screwdriver
    GM1246036Courtesy of GENERAL MOTORS CORP.
  4. Using a screwdriver, install the snap ring.
  5. Fig 3: Turning Rear Planetary Sun Gear And One-Way Clutch
    GM1246037Courtesy of GENERAL MOTORS CORP.
  6. Install the one-way clutch and thrust washer to the rear planetary sun gear.
  7. Hold the rear planetary sun gear and turn the one-way clutch. The one-way clutch should turn freely clockwise and should lock counterclockwise.