LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - AISIN 81-40LE - Service, Overhaul, Removal & Installation & Diagnosis >> Oil Pump Assemble

Oil Pump Assemble

    Fig 1: View Of Oil Pump Drive Gear And Driven Gear
    GM1246011Courtesy of GENERAL MOTORS CORP.
  1. Install the oil pump drive gear and driven gear.
  2. Fig 2: View Of Drive Gear And Bolts
    GM1246012Courtesy of GENERAL MOTORS CORP.
  3. Align the stator shaft with each bolt hole.
  4. NOTE: Refer to Fastener Notice .
  5. Install the 8 bolts.

    Tighten:  Tighten the bolts to 9.8 N.m (87 lb in)  .

  6. Fig 3: Turning Drive Gear With 2 Screwdrivers
    GM1246010Courtesy of GENERAL MOTORS CORP.
    NOTE: Use extreme care when working around oil seals. Damage to the lip of a seal will cause oil leaks.
  7. Turn the drive gear with 2 screwdrivers and make sure it rotates smoothly.