LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - AISIN 81-40LE - Service, Overhaul, Removal & Installation & Diagnosis >> Floor Shift Control Cable Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Control Cable Pinch Bolt And Nut
    GM1290878Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the floor console. Refer to Front Floor Console Replacement .
  3. Remove the cable adjusting nut.
  4. Disconnect the shift control cable from the shift control lever assembly.
    5. Fig 2: View Of Shift Control Cable And PNP Switch Lever
    GM1245820Courtesy of GENERAL MOTORS CORP.
  5. Remove the shift control cable retaining E-ring.
  6. Disconnect the shift control cable from the park/neutral position (PNP) switch.
    7. Fig 3: View Of Shift Control Cable, E-Ring And Bracket
    GM1376105Courtesy of GENERAL MOTORS CORP.
  7. Remove the E-ring from the shift control cable bracket and disconnect the shift control cable.
  8. Disconnect the shift control cable from the shift control cable fastener.
  9. Remove the shift control cable from the vehicle.
scientia non olet · About LEMON Manuals