Hold Mode Switch (M98)
Courtesy of GENERAL MOTORS CORP. Hold Mode Switch Connector Terminal Identification (M98)
| Pin |
Wire |
Circuit |
Function |
| 1 |
GN/WH |
- |
Hold Mode Switch Signal |
| 2 |
BN/WH |
- |
Illumination Supply Voltage |
| 3 |
GN |
- |
Illumination Control |
| 4 |
BK |
- |
Ground |
Connector Part Information
- OEM: KET MG652999
- Description: 4-Way F 040 Unsealed
|