LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Removal Procedure

Removal Procedure

  1. Support the hood in the open position.
    2. Fig 1: Identifying Hood Prop Rod
    GM1309220Courtesy of GENERAL MOTORS CORP.
  2. Remove the hood prop rod by gently prying the base from the radiator support.
scientia non olet · About LEMON Manuals