LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement >> Removal Procedure

Removal Procedure

  1. Removal the front wheel well splash shield. Refer to Wheelhouse Splash Shield Replacement .
  2. Reposition the front headlamp.
  3. Fig 1: View Of Front Fascia Bolt
    GM1309225Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts securing the front fascia to the fender.
  5. Reposition the front fascia.
  6. Fig 2: Identifying Fender Bolts Behind Fascia
    GM1309227Courtesy of GENERAL MOTORS CORP.
  7. Remove the fender bolts behind the front fascia.
  8. Remove the bolts at the base of the fender.
  9. Fig 3: Identifying Fender Bolts
    GM1309229Courtesy of GENERAL MOTORS CORP.
  10. Open the front door and remove the bolt at the base of the windshield pillar.
  11. Reposition the air inlet grille weatherstrip.
  12. Fig 4: View Of Upper Fender Bolts
    GM1309239Courtesy of GENERAL MOTORS CORP.
  13. Remove the upper fender bolts and the fender.