Rear Crankshaft Main Bearing Seal: Service and Repair

Crankshaft Rear Oil Seal Replacement

Removal Procedure

1. Remove the flywheel. Refer to Engine Flywheel Replacement (Service and Repair) .
2. Remove the crankshaft rear oil seal. Refer to Crankshaft Rear Oil Seal Removal (Overhaul) .



Installation Procedure

1. Install the rear main seal. Refer to Crankshaft Rear Oil Seal Installation (Overhaul) .
2. Install the engine flywheel. Refer to Engine Flywheel Replacement (Service and Repair) .