Radiator Hose Replacement - Inlet (3.6L)
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Radiator Hose Replacement - Inlet (3.6L)
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications
. Preliminary Procedure: Drain the cooling system. Refer to Draining and Filling Cooling System (LY7) or Draining and Filling Cooling System (L26) in Engine Cooling. |
|
| 1 | Hose, Radiator Surge Tank Tip: Use J 38185 hose clamp plier to release the clamp on the radiator inlet hose. See Special Tools . |
| 2 | Cap, Radiator |
| 3 | Hose, Radiator Inlet Tip: Use J 38185 hose clamp plier to release the clamp on the radiator inlet hose. See Special Tools . |