LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 1 Of 5)) >> On-Vehicle Repair Instructions - Part 1 >> Engine Mount Bracket Replacement - Right >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Mount Upper Nuts
    GM96010Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount bracket to the engine mount.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the engine mount upper nuts.

    Tighten:  Tighten the engine mount upper nuts to 53 N.m (39 lb ft).

  3. Install the engine mount. Refer to Engine Mount Replacement - Right .
scientia non olet · About LEMON Manuals