LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Impala Police >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Side Door Hinge Replacement >> Removal Procedure

Removal Procedure

IMPORTANT: This procedure is completed with the rear door closed at all times. Do each door hinge separately, and replace the broken door hinge first.
    Fig 1: Identifying Body Side Rear Door Hinge Bolts
    GM459244Courtesy of GENERAL MOTORS CORP.
  1. Open the front door in order to remove the rear door hinges.
  2. Clean the mounting surfaces with clean a rag and mark the rear door hinge locations on each surface with a grease pencil or other suitable marker.
  3. Remove the bolts from the doorside rear door hinge.
  4. Remove the bolts (1-5) from the bodyside rear door hinge.
  5. Remove the rear door hinge from the vehicle.
scientia non olet · About LEMON Manuals