Hood Primary Latch Release Cable Handle Replacement

Fig 1: Replacing Hood Latch Release Handle

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the carpet retainer. Refer to Front Carpet Retainer Replacement (Impala) .
1	Hood Release Handle Screw NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Hood Release Handle Nut Tighten: 10 N.m (89 lb in)
3	Hood Release Handle Tip: Disconnect the cable from the handle.