LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 1 Of 5)) >> On-Vehicle Repair Instructions - Part 1 >> Valve Lifter Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the applicable camshaft(s). Refer to Camshaft Replacement - Right .
  2. Remove the rocker arms. Refer to Valve Rocker Arm Removal - Right .
  3. Fig 1: View Of SHLAs
    GM902901Courtesy of GENERAL MOTORS CORP.
  4. Remove the lifters. Refer to Valve Lifter Removal - Left .
  5. Clean and inspect the camshaft(s) and the rocker arm(s). Repair or replace as necessary. Refer to Camshaft Cleaning and Inspection and Valve Lifters Cleaning and Inspection .