LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Identifying Oil Pan Bolts
    GM104466Courtesy of GENERAL MOTORS CORP.
  2. Loosen the oil pan bolts.
  3. Drain the oil. Use a suitable container to catch the transmission fluid.
  4. Remove the oil pan attaching bolts.
    5. Fig 2: View of Oil Pan
    GM104468Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil pan.
    6. Fig 3: Locating Oil Pan Gasket
    GM104471Courtesy of GENERAL MOTORS CORP.
  6. Remove the oil pan gasket.
scientia non olet · About LEMON Manuals