LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Low/Reverse Servo Assembly Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Vehicle Lifting Caution .
  1. Raise the vehicle. Support the vehicle.
  2. Remove the oil pan and filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
  3. Remove the oil feed pipes. Refer to Oil Feed Pipes Replacement .
    4. Fig 1: View Of Low/Reverse Servo Assembly
    GM588858Courtesy of GENERAL MOTORS CORP.
  4. Remove the three low/reverse band servo cover bolts, the servo and the spring.
  5. Disassemble, clean and inspect the low/reverse servo assembly. Refer to Low and Reverse Servo Disassemble .
scientia non olet · About LEMON Manuals