LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Control Valve Body Cover Gasket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Components On Side Cover
    GM20822Courtesy of GENERAL MOTORS CORP.
  1. Install the side cover gaskets (5 and 6) into the grooves on the side cover (1).
  2. Retain the seals with J 36850  or equivalent.
  3. Install the side cover to drive sprocket thrust washer (7) onto the side cover.
  4. Retain the thrust washer with J 36850  or equivalent.
  5. Install the transmission side cover. Refer to Control Valve Body Cover Replacement .
scientia non olet · About LEMON Manuals