LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Transmission Fluid Pressure Switch Removal

Transmission Fluid Pressure Switch Removal

    Fig 1: Locating TFP Switch Assembly
    GM1205810Courtesy of GENERAL MOTORS CORP.
  1. Remove the six bolts from the TFP switch assembly (8, 12, and 16).
  2. Remove the TFP switch assembly (13) from the control valve body assembly (18). The 4 pressure switch O-rings are reusable and should remain with the TFP switch assembly.
scientia non olet · About LEMON Manuals