LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Low and Reverse Servo Removal

Low and Reverse Servo Removal

    Fig 1: Identifying Servo Return Spring
    GM20169Courtesy of GENERAL MOTORS CORP.
    NOTE: Remove bolts evenly, to prevent bore damage.
  1. Remove the three servo cover bolts (25).
  2. Remove the servo cover assembly (Lo and Reverse) (73).
  3. Remove the servo return spring (66).
scientia non olet · About LEMON Manuals