LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Control Valve Body Spacer Plate Removal

Control Valve Body Spacer Plate Removal

    Fig 1: Removing & Installing Spacer Plate Support & Spacer Plate
    GM1844265Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 spacer plate support bolts (20).
  2. Remove the spacer plate support (21).
    3. IMPORTANT: The Non-Electronic Range Select Mode 4T40-E/4T45-E has a different spacer plate than the 4T45-E Electronic Range Select Mode transmission.
  3. Remove and discard the spacer plate assembly (90).
scientia non olet · About LEMON Manuals