LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR SS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Actuator Guide Replacement

Actuator Guide Replacement

IMPORTANT: Do not remove the actuator guide unless the actuator guide appears damaged.
    Fig 1: View Of Actuator Guide Components
    GM20215Courtesy of GENERAL MOTORS CORP.
  1. Remove the actuator guide roll pin (810) from the case.
  2. Remove the actuator guide (812) and O-ring seal (811) assembly from the case (51). For easiest removal, tap the actuator guide (812) into the case (51).
  3. Install a new O-ring seal (811) on the actuator guide (812).
  4. Install the actuator guide (812) and O-ring assembly (811) into the transmission case (51).
  5. Install the actuator guide roll pin (810) into the case (51) in order to secure the actuator guide (812).
scientia non olet · About LEMON Manuals