Shift Control Cable Adjustment
- Place the shift control lever in the PARK position.
Courtesy of GENERAL MOTORS CORP.
- Carefully remove the shift cable end (3) from the transmission range select lever (5).
- Release the shift cable retainer (3) from the shift cable bracket (6).
- On the underside of the cable adjustment lock protective sleeve (4), release the retaining tab using a flat bladed tool.
- Slide the cable adjustment lock protective sleeve (4) toward the end of the cable (3) to expose the cable adjustment lock (2).
- Release the cable adjustment lock (2) to allow freedom of movement of the cable end (3).
- Secure the shift cable retainer (3) to the shift cable bracket (6).
- Secure the shift cable end (3) to the transmission range select lever (5).
- Insure both the shift control lever and the transmission range select lever (5) are in the park position.
- Depress the cable adjustment lock (2) to secure the adjustment of the shift cable end (3).
- Slide the cable adjustment lock protective sleeve (4) over the cable adjustment lock (2).
- Test the shift control lever in all positions for proper gear range selection.