LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Control Valve Body Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing & Installing Control Valve Body Assembly
    GM1776844Courtesy of GENERAL MOTORS CORP.
  1. Remove the transmission side cover. Refer to Control Valve Body Cover Replacement .
  2. Remove the bolts (9, 12 and 16) from the control valve body assembly (18).
  3. Remove the control valve body assembly (18).
  4. Remove and discard the spacer plate assembly with bonded gasket (90).
scientia non olet · About LEMON Manuals