LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Reaction Internal Gear, Input Carrier Installation

Reaction Internal Gear, Input Carrier Installation

Fig 1: Input Carrier & Reaction Gear Assembly
GM1644733Courtesy of GENERAL MOTORS CORP.
IMPORTANT: While installing the reaction internal gear and input carrier assembly, rotate the assembly in order to mesh the input carrier pinion gears to the input internal gear.

Install the reaction internal gear and input carrier assembly (106) into the transmission case.

scientia non olet · About LEMON Manuals