LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR L4-2.0L Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assemble, Disassemble, and Installation >> Low/Reverse Band Installation

Low/Reverse Band Installation



Low/Reverse Band Installation





Install the low/reverse band (111) into the transmission case. Align the servo pin apply surface toward the bottom pan and hook the band into the band anchor pin inside the transmission case.

scientia non olet · About LEMON Manuals