LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> HHR L4-2.0L Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 66. Crankshaft Front Oil Seal Installation

66. Crankshaft Front Oil Seal Installation



Crankshaft Front Oil Seal Installation

Tools Required

J 34115 Sprocket Bearing Installer





1. Install the seal into the front cover using the J 34115 .
2. Ensure that the engine front cover is properly supported when installing the seal.


scientia non olet · About LEMON Manuals