LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Express 1500 AWD V8-5.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L80-E/4L85-E Automatic Transmission >> Assemble, Disassemble, and Installation >> Overdrive Carrier Assemble

Overdrive Carrier Assemble



Overdrive Carrier Assemble





1. Install the overdrive clutch roller assembly (512) on the overrun clutch housing assembly (504).

Important: Rotate the overdrive carrier assembly (514) during installation in order to line up the overdrive clutch plates with the overdrive carrier assembly splines.


2. Install the overdrive carrier assembly (514) on the overrun clutch housing assembly (504).





Notice: Align the components carefully to avoid damaging the turbine shaft oil seal rings.

3. Install the turbine shaft (502) through the overrun clutch housing assembly (504) and the overdrive carrier assembly (514).
4. Install the overdrive carrier retainer ring (522).


scientia non olet · About LEMON Manuals