LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Express 1500 AWD V8-5.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E/4L65-E/4L70-E Automatic Transmission >> Assemble, Disassemble, and Installation >> 1-2 Accumulator Assemble

1-2 Accumulator Assemble



1-2 Accumulator Assemble





1. Inspect the 1-2 accumulator piston (56) for the following conditions:

* Porosity
* Cracks
* Scoring
* Nicks and Scratches

2. Install a 1-2 accumulator piston oil seal ring (55) on the 1-2 accumulator piston (56).




3. Inspect the 1-2 accumulator housing for the following conditions:

* Porosity
* Cracks
* Scoring
* Nicks and Scratches
* Debris or blocked passages






Important: Some models may not use an outer 1-2 accumulator spring (54).


4. Install the 1-2 inner (104) and outer (54) accumulator springs.
5. Install the 1-2 accumulator piston (56).


scientia non olet · About LEMON Manuals