LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - 6L50/6L80/6L90 - DTC P09786 To DTC P2764) >> DTC P1831 or P1832 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Clear the DTC and operate the vehicle under the conditions for running and setting the DTC.
  2. Observe the High Side Driver CKT Status parameter. The parameter should display OK.
    • If the parameter displays Open, Short to Ground, Short to Voltage, or the DTC resets, replace the control solenoid (w/body and TCM) valve assembly. Refer to Control Module References for replacement, setup, and programming.