Automatic Transmission Fluid Pressure Test Hole Plug Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Oil Pressure Test Plug

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Oil Pressure Test Plug Tip: Clean the surrounding area around the oil pressure test plug. Check the transmission fluid level. Refer to Transmission Fluid Check and Transmission Fluid Fill Procedure . Tighten: 11 N.m (97 lb in)

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

Oil Pressure Test Plug
Tip:

Clean the surrounding area around the oil pressure test plug.
Check the transmission fluid level. Refer to Transmission Fluid Check and Transmission Fluid Fill Procedure .

Tighten: 11 N.m (97 lb in)