LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Uplander V6-3.9L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assemble, Disassemble, and Installation >> Drive Shaft Oil Seal Disassemble - Right Side

Drive Shaft Oil Seal Disassemble - Right Side



Drive Shaft Oil Seal Disassemble - Right Side

Tools Required
* J 23129 Seal Remover
* J 6125-1B Slide Hammer





Use J 23129 and J 6125-1B in order to remove the axle oil seal assembly (4) from the case extension assembly (6).