LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Uplander V6-3.9L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Torque Converter Clutch Solenoid >> Service and Repair

Torque Converter Clutch Solenoid: Service and Repair



Torque Converter Clutch Pulse Width Modulation Solenoid Replacement

Removal Procedure

1. Remove the case side cover.
2. Disconnect the transaxle wiring harness.




3. Remove the torque converter clutch PWM solenoid (334).

Installation Procedure




1. Install the torque converter clutch PWM solenoid (334).
2. Connect the transaxle wiring harness.
3. Install the case side cover.

scientia non olet · About LEMON Manuals