LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra5 LT, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Reservoir Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Reservoir Electrical Connector
    GM1289919Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Remove the reservoir only when replacing a damaged or a leaking reservoir.
  1. Disconnect the electrical connector from the reservoir.
    2. Fig 2: Prying Reservoir With Screwdriver
    GM1289938Courtesy of GENERAL MOTORS CORP.
  2. For vehicles with the manual transaxle, disconnect the clip to the clutch hose connection to the master cylinder, and move the clip out of the way.
  3. Remove the clutch hose from the master cylinder.
  4. Gently pry upwards with a screwdriver to release the reservoir.
  5. Tilt the reservoir and pull it upward in order to remove it.
    6. Fig 3: View Of Reservoir Seals
    GM1289939Courtesy of GENERAL MOTORS CORP.
  6. Remove the reservoir seals from the master cylinder body.
scientia non olet · About LEMON Manuals