LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra5 LS, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Knee Bolster Bolts
    GM1308959Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the knee bolster with the bolts.

    Tighten:  Tighten the driver side knee bolster mounting bolts to 10 N.m (89 lb in)  .

  2. Fig 2: View Of Coin Storage And Screws
    GM1308936Courtesy of GENERAL MOTORS CORP.
  3. Install the I/P under cover.
  4. Connect the hood release cable to the hood latch release handle.
  5. Install the coin storage and the screws.