LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra5 LS, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Center Trim Panel Replacement (Four Door) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Center Trim Panel
    GM1308251Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution
  1. Disconnect the negative battery cable.
  2. Pull out the center molding.
  3. Disconnect the mode control cable from the mode door.
  4. Disconnect the electrical connectors.
  5. Fig 2: View Of Temperature Control
    GM1308247Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the temperature control cable by gently prying the cable eyelet from the post on the controller. Unsnap the cable housing from the mechanical slide. Note the location of the cable and the housing for ease of installation.
  7. Pry off the clip of the temperature control cable.
  8. Fig 3: View Of Center Molding
    GM1308246Courtesy of GENERAL MOTORS CORP.
  9. Remove the center molding from the instrument panel.