LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra LT, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Repair Instructions >> Front Brake Rotor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Front Wheel Hub Detent Screw
    GM1289965Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: To guarantee uniform braking on both sides, both rotors must have identical surfaces regarding smoothness and scoring depth. For this reason, always replace both rotors.
  1. Remove the caliper assembly without disconnecting the brake hoses. Refer to Front Brake Caliper Replacement .
  2. Remove the rotor-to-front wheel hub detent screws.
  3. Pull off the rotor.
scientia non olet · About LEMON Manuals