Front Floor Console Replacement

Fig 1: Console Replacement - Front Floor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the console accessory switch mount plate. Refer to Front Floor Console Accessory Switch Mount Plate Replacement . Apply the parking brake. Place the shifter in the neutral position.
1	Front Floor Console Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Floor Console ( Console Trim Plate ) Tip: Disconnect the electrical connector.
3	Retainer Clips (Qty: 3)