Drive Belt Tensioner Replacement - Accessory

Drive Belt Tensioner Replacement - Accessory

Removal Procedure




1. Remove the accessory drive belt.
2. Remove the drive belt tensioner bolts.
3. Remove the drive belt tensioner.

Installation Procedure




1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolts.

Notice: Refer to Fastener Notice.

3. Tighten the drive belt tensioner bolts.

Tighten the accessory drive belt tensioner bolts to 50 N.m (37 lb ft).

4. Install the accessory drive belt.