Rear Seat Cushion Cover and Pad Replacement

Rear Seat Cushion Cover and Pad Replacement

Removal Procedure

1. Remove the rear seat from the vehicle.
2. Remove the seat riser.




3. Release the J channel fasteners securing the seat cushion cover to the seat cushion frame.
4. Release the hook and loop fasteners.
5. Remove the seat cushion cover from the seat cushion pad.
6. Remove the seat cushion pad from the seat cushion frame.

Installation Procedure

1. Position the seat cushion pad to the seat cushion frame.
2. Position the seat cushion cover to the seat cushion pad.
3. Engage the hook and loop fasteners.




4. Engage the J channel fasteners.
5. Install the seat riser.
6. Install the rear seat into the vehicle.