Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Actuator Retaining Screws | 9 N.m | 80 lb in |
| Column Support Bracket Bolts Lower (Tighten in Sequence) | 24 N.m | 18 lb ft |
| Column Support Bracket Bolts Upper (Tighten in Sequence) | 24 N.m | 18 lb ft |
| Intermediate Shaft to the Steering Column Pinch Bolt | 48 N.m | 35 lb ft |
| Intermediate Shaft to the Steering Gear Pinch Bolt | 27 N.m | 20 lb ft |
| Intermediate Shaft to the Steering Gear Pinch Bolt Shield Screw | 3.5 N.m | 31 lb in |
| Steering Column Support Screws | 18 N.m | 13 lb ft |
| Steering Wheel Nut | 41 N.m | 30 lb ft |
| Telescope Drive Screw | 7 N.m | 62 lb in |
| Telescope Drive Bracket Screw | 7 N.m | 62 lb in |
| Turn Signal Multifunction Switch Screws ECL Columns | 7 N.m | 62 lb in |
| Turn Signal Multifunction Switch Screws Non ECL Columns | 1 N.m | 9 lb in |