LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Cobalt LTZ >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Lid Overslam Bumper Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Outer Bumper From Compartment Lid
    GM1315885Courtesy of GENERAL MOTORS CORP.
  1. Install the outer bumper to the compartment lid by twisting the bumper clockwise.
  2. Close the rear compartment.