LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Cobalt L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Air Cleaner Housing >> Air Cleaner Fresh Air Duct/Hose >> Service and Repair >> Air Cleaner Inlet Duct Replacement

Air Cleaner Inlet Duct Replacement



Air Cleaner Inlet Duct Replacement

Removal Procedure

1. Remove the right front tire and wheel.
2. Remove the right front fender liner.




3. Remove the air cleaner intake duct assembly push-in fasteners.
4. Remove the air cleaner intake duct assembly bolt.
5. Remove the intake duct assembly from the vehicle.

Installation Procedure




1. Position the intake duct assembly.

Notice: Refer to Fastener Notice.

2. Install the intake duct assembly bolt.

Tighten the bolt to 10 N.m (89 lb ft).

3. Install the intake duct assembly push in fasteners.
4. Install the right front fender liner.
5. Install the right front tire and wheel.
scientia non olet · About LEMON Manuals