LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Cobalt L4-2.0L SC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - M/T >> Clutch Pedal Position Sensor / Switch >> Adjustments >> Clutch Pedal Position Switch Adjustment (New Pedal)

Clutch Pedal Position Switch Adjustment (New Pedal)



Clutch Pedal Position Switch Adjustment (New Pedal)

Installation Procedure




1. While holding the pedal in the fully released position, press the switch (2) toward the pedal until the barrel of the switch (2) touches the shipping clip (1).
2. Remove the shipping clip (1).
3. Connect the electrical connector (3).

scientia non olet · About LEMON Manuals