LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> On-Vehicle Repair Instructions >> Vehicle Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Input & Output Speed Sensors
    GM686957Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the input speed sensor (1) electrical connector.
  3. Remove the input speed sensor bolt.
  4. Remove the input speed sensor (1) and the bracket assembly from the case.
  5. Inspect the vehicle speed sensor assembly (1) for any evidence of damage.
scientia non olet · About LEMON Manuals