LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> On-Vehicle Repair Instructions >> Transmission Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Transmission Heat Shield & Bolts
    GM765127Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission heat shield to the cross member.
    2. NOTE: Refer to Fastener Notice.
  2. Install the two bolts securing the transmission heat shield to the cross member.

    Tighten:  Tighten the bolts to 17 N.m (13 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals