LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> On-Vehicle Repair Instructions >> Tow/Haul Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Tow/Haul Switch Clips
    GM1461714Courtesy of GENERAL MOTORS CORP.
  1. Install the switch into the trim plate bezel opening by pushing the switch in until the clip (1) snap into place.
  2. Connect the electrical connector to the tow/haul switch.
  3. Install the instrument panel trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
scientia non olet · About LEMON Manuals