LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> On-Vehicle Repair Instructions >> Forward Servo Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the oil pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement .
  3. Remove the six forward servo cover bolts, cover, and gasket.
  4. Fig 1: Forward Servo Assembly
    GM512978Courtesy of GENERAL MOTORS CORP.
  5. Remove the following parts:
    1. Forward servo piston pin (5)
    2. O-ring seal (4)
    3. Servo piston (3)
    4. Retainer (2)
    5. Piston spring (1)