LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> On-Vehicle Repair Instructions >> Accumulator Housing Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Accumulator Housing Assembly
    GM477683Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the control valve body assembly. Refer to Valve Body and Pressure Switch Replacement .
  3. Remove the 3rd and 4th clutch accumulator housing bolts (1).
  4. Remove the 3rd and 4th clutch accumulator housing (8).
  5. Remove the accumulator housing gasket (6). The accumulator housing gasket may be stuck to the spacer plate (5).
  6. Remove the 3rd clutch accumulator piston spring (7).
  7. Remove the 4th clutch accumulator piston spring (2).
  8. Remove the control valve body spacer plate (5).
  9. Remove the control valve assembly to spacer plate gasket (4) from the spacer plate (5).
scientia non olet · About LEMON Manuals